Countertop Eftpos solutions come in several formats – One Piece, Pass Over and Two Piece.
Each of the Brands – Verifone, Ingenico and Hypercom have different models and configurations that may suit a site more so than the other.
These differences can include…
- Suitablity to sharing a phone line with other devices,
- Phone Top Up software (such as Ezipay or EPay).
- Connectivity to Point Of Sale,
- High Volume vs Low Volume sites,
- Raised or Wide Counter sites,
- Drive Thru sites,
- Also other considerations are speed, reliability, IP vs dial and dial back up options, the ability to Re-Load software remotely, the ability to fall back to a one piece terminal in event of Pin Pad failure plus many more differences OR a combination of the above.
We have a document we can share with you on choosing the best terminal to suit your needs.
If you wish to have a copy – Please Phone 0800 5494 767 and ask for it to be sent to you.
We can then also help you over the phone to sort through these issues to help you choose what terminal is best for you.
One Piece Terminals are where the Eftpos Terminal, and the Pin Pad for the customer and Printer are an “All in One” piece configuration.
Pass Over Terminals have the Eftpos Terminal and customer Pin Pad combined into one Keypad, But there is a separate Printer/Modem, – This makes the Eftpos Terminal / Pin Pad that is passed from business operator to customer a lot smaller device than the one piece terminal.
Two Piece Terminals are where there are 2 Keypads, – One in the main Eftpos Terminal for the business operator, and one in the Pin Pad facing the Customer. The Main terminal houses the printer. These are better for busier sites and saves staff time passing equipment back and forth. Great for speeding up a queue or when site conditions make this necessary.
Some of these combinations above can with the latest software releases be used to connect as an “Interfaced” or as an “Integrated” solution too some brands of Point of Sale Software or Cash Registers.
The list of Eftpos to POS interfaces is regularly updated as Interfaces are Certified on the Paymark Network,
- So if you would like the latest list sent to you, – Please ask for it by Phoning 0800 5494 767
Ingenico Nitro
Nitro is an enterprise grade payment system that runs in 20,000 lane supermarket chains, and can even be installed in single lane sites. Nitro combines an Ingenico i5100 EFTPOS terminal with powerful software that runs on the POS to fully integrate your POS & EFTPOS products. Nitro prints on your POS printer (no more seperate EFTPOS+POS dockets), is fast with TCP/IP broadband transactions (approval within 1-3 seconds) and if you sign up to Paymark’s Online Assist you have full access to all your merchant banking and transaction...
read moreCadmus Paytrium
Due to SmartpayCadmus not servicing any Terminals outside the Warranty period AT ALL – WE HAVE REMOVED SmartpayCadmus Terminals from our offering
read moreVerifone vx510 and vx810 Pin Pad
For both Paymark and EftposNZ/ANZ Certification Our most Popular Terminal Features & Specifications • 6 MB Memory, 32 Bit processor, 14.4 kbps Modem • Paymark 6.0 Paymark Software + also Latest EftposNZ/ANZ Software • PCI/PED Certified • IP – Broadband capable – (Paymark Fees Apply – Please Ask for details) • Intuitive ATM-style interface Large backlit display on both Terminal and PIN pad • Large size menu prompts for ease of use • High speed thermal printer with easy drop & insert paper loading (18 Lines per...
read more
Verifone vx810 Duet
LATEST RELEASED TERMINAL IN NZThe VeriFone Vx810 Duet terminal is the ideal countertop solutions for all your fixed location payment requirements. A one piece terminal with a two piece terminal feel, this interface capable terminal has the ability to transact via Dial or Ethernet IP on the Paymark or ENZ (ANZ) Networks to best meet your specific needs. Paymark and ENZ Certified Debit & Credit Card Processing Multi Merchant (up to eight merchants) Dial Up & Ethernet IP Communications Interface Capable – Ask us what POS and Cash...
read moreIngenico i5100
A Counter Top Terminal with Internal Pin Pad & Printer – For lower volume businesses with the Business operator and customer sharing the same keypad. Comes with 6.0 Paymark Software with back lit display & key pad on the market. Can INTERFACE to various P.O.S. and Cash Registers – Ask us for the lastest list of which models this interfaces to. Also – SOON to be released as a Fully INTEGRATED Eftpos Solution as the “NITRO” Terminal. Ask us what POS this interfaces to. Features & Specifications • 6 MB Memory, 32 Bit...
read moreHypercom T4220
Good General Retail Broadband capable with Auto Dial back Up. Features and Benefits • For Paymark Network • Supports Hospitality • 1 Year Warranty Hypercom LINK to some POS Phone Top ups coming soon
read moreVerifone vx570
For EftposNZ / ANZ Network Terminal, can remotely reload software if lost so is good for remote sites.
read moreHypercom T4220 and S9 Pin Pad
The Hypercom Terminal suits general retail and has INTERFACES to many P.O.S. software applications.
read moreIngenico i5100 and i3010 Pin Pad
Features & Specifications • 6 MB Memory, 32 Bit processor, 38.8kbps Modem • 6.0 Paymark Software • PCI/PED Certified • IP – Broadband capable – (Paymark Fees Apply – Please Ask for details) • Printer – drop and load • High-speed thermal printer Can connect to various P.O.S. and Cash Registers – Ask us for the lastest list of which models this interfaces to. PAYMARK Application Software includes: • Multi-Merchant support – (8 Businesses per terminal) • Training mode • Multi-Acquirer • Man PAN Link for manual...
read more